Marantz RC1400 Mode D'emploi page 28

All manuals and user guides at all-guides.com
Erasing Sources
This procedure clears all codes and names
programmed to the DVD, TV, or other sources.
All codes and names in the four direct button
pages are also erased.
This example shows how to erase the names
and codes learned from the DVD player.
1
USE PAGE 1
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the D5 (ERASE) direct button t.
3 Press the DVD source button !4 .
The
4 Press the DVD source button !4 while
holding down the CLEAR button !6 .
5 Press the D4 (YES) direct button t to
erase.
All codes and names programmed to the DVD source
are erased. When the codes are cleared, the codes for
this button reset to the factory default code or become
blank. Any rewritten names return to the original
name.
• To cancel the erasing operation, press the D5
(NO) button to return to the previous display.
6 When the erasing operation is finished,
press the M button r.
The
remote control can now be operated.
Erasing All
This procedure clears (resets) all programmed
codes and names. Once all the data is cleared,
the memory is returned to the factory default
status. The programmed macros are also
erased.
1
USE PAGE 1
RC1400N 01 ENG
3 4
LEARN LEARN
USE PAGE 1 2 USE PAGE
USE and LEARN indicators blink.
USE indicator displays to indicate that the
3 4
LEARN
LEARN
USE PAGE
USE PAGE 1 2
26
Page 26
1 2
1 2
Adobe PageMaker 6.5J/PPC
03.10.6, 4:18 PM