Marantz RC1400 Mode D'emploi page 44

All manuals and user guides at all-guides.com
Setting the Macro Interval Time
When a macro program is executed, control
signals are transmitted in sequence. This
transmission interval (interval time) can be set
in 0.5-seconds units from 0.5 to 5 seconds.
If the interval time is set in this Setup mode, the
interval times for all programmed macros are
changed. If necessary, use EDIT (see page
33) in the macro program to change the
individual transmission times.
The factory default setting for the transmission
interval is 1 second.
This example shows how to set the interval
time to 5 seconds.
2
PAGE 1 2
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the > button y to display the
second page SETUP menu.
3 Press the D2 (I-TIME) direct button t.
4 Press the
the interval time.
Holding down the cursor button fast-forwards the
time indicator.
5 Press the OK cursor button @0 to enter the
interval time.
6 Once the setting is finished, press the M
button r.
RC1400N 01 ENG
3 4
LEARN LEARN
1 2 3 4 1 2 3 4
cursor button @0 to set
or
42
Page 42 03.10.6, 4:19 PM
Adobe PageMaker 6.5J/PPC