Télécharger Imprimer la page

Garland GRASS 765 SB Manuel D'instructions page 37

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
• Machine.
• Upper handle.
• Lower handle.
• Bag.
• Mulching cap.
• Upper handle screw and wing nut (2).
• Lower handle wing nuts (2).
• Lower handle screws (2).
• Cable engagement circlip.
• Instruction manual.
• Engine instruction manual.
Carefully remove all items from the box and make
sure that all listed items are present. Carefully inspect
the product to ensure that there are no damaged
elements.
If you find any damaged or missing parts, do not use
the machine until the defect has been repaired or
all the missing pieces replaced. Using the machine
without all of its parts or with defective parts can
cause severe personal injury.
6.2. ASSEMBLY
6.2.1. ASSEMBLING THE HANDLEBAR
Place the lower handlebar
and once the screw have
been inserted tighten the
nut.
Position the upper handle on the lower handlebar and
once the screws have been inserted tighten the wing
nuts.
Place the cable engagement circlip.
6.2.2. ASSEMBLING THE SACK
Lift the rear outlet cover and engage the protrusions
on the chassis of the bag rear cover axle.
6.2.3. ASSEMBLING THE MULCHING CAP
Lift the rear entry cover and install the mulching cover
as shown on the figure. Put the rear entry cover back
into place.
37/160
English
Mulching cap

Publicité

loading