INSTALLATION
• Drill the mounting holes in the cupboards. Filler pieces are supplied
for fixing the cooker hood to cupboards with a wall thickness of
16 mm. The supplied angle iron (Q) can be used to fill in the space
at the back between the cooker hood and the wall.
Mounting the cooker hood on the wall
Use drilling jig N1 to determine the position of the mounting holes. The
top of the jig is level with the top of the cooker hood.
1. Drill the holes and attach the wall brackets (R) to the wall using
plugs and screws.
2. Slide the suspension brackets into the cooker hood from the back.
3. Secure the bracket using the supplied screws and locking rings.
4. Turn a socket screw in the suspension brackets. You can use this
later to adjust the height.
5. Hang the hood on the wall brackets. The height and depth of
the hood can be adjusted using the set screws or by sliding the
brackets inwards or outwards.
GB 13