Toro Z Master Professional 7000 Serie Manuel D'utilisation page 53

1. Drain valve
2. Water separator
Changing the Fuel Filter
Never install a dirty fuel filter if it is removed from the
fuel line.
1. Allow the machine to cool down.
2. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Close the fuel shut-off valve
5. Loosen the 2 hose clamps and disconnect the
fuel lines from the fuel filter
6. Install a new filter. Connect the fuel lines to the
fuel filter and install the 2 hose clamps
67).
7. Open the fuel shut-off valve.
8. Start the engine and check for leaks.
Figure 66
3. Back of machine
(Figure 67).
(Figure 67).
g007169
1. Fuel filter
2. Hose clamp
3. Fuel pump
Servicing the Fuel Tank
Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and
(Figure
services any components of the fuel system.
51
Figure 67
4. Left side of machine
5. Fuel-shutoff valve
g007697