Bosch AVENAR 8000 Guide D'installation page 43

All manuals and user guides at all-guides.com
AVENAR keypad 8000
4 Wiring
Notice!
Do not modify the fire alarm control panel to extend USB and
IN1/2 cables outside the housing. Only use cables for USB and
IN1/2 with a maximum length of 3 m.
Notice!
You will find detailed information about the CAN and Ethernet
networking of the panels in the Networking Guide available for
download at
https://www.boschsecurity.com .
Notice!
The manufacturer's specifications for the minimum bending
radius of the network and fiber optic cables used must be
observed during installation.
The Remote keypad features
– 2 CAN interfaces (CAN1/CAN2) for networking
– 1 Rail connector (for redundancy only)
– 4 Ethernet interfaces (1 / 2 / 3 / 4) for networking,
recommended usage:
–
–
–
– 2 signal inputs (IN1/IN2)
– 1 USB host interface for configuration via FSP-5000-RPS
– 1 Memory card interface
– 2 Power supply connectors (DC1/DC2)
Fixing the wires and the shield cable to the housing
Bosch Sicherheitssysteme GmbH
1 and 2 (blue): Panel network
3 (green): Building management system, hierarchy
panel, voice alarm system
4 (red): Remote Services
Wiring | en
2020.05 | 8.0 | F.01U.347.558
43