Publicité
Les langues disponibles
Les langues disponibles
PROBlEM
Unit will not start.
Unit starts immediately upon inserting battery.
Battery pack will not charge.
Unit shuts off abruptly.
TROUBLESHOOTING
POssiBlE CAUsE
Battery pack not installed properly.
Battery pack not charged.
The switch has been left in the "on" position.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shutoff
abruptly when the charge is depleted.)
POssiBlE sOlUTiOn
Check battery pack installation.
Check battery pack charging requirements.
The switch must be moved to "off" to prevent
the tool from immediately starting when battery
is inserted.
Insert battery pack into charger until LED lights.
Plug charger into a working outlet. Refer to
Important Charging Notes for more details.
Move charger and battery pack to a surrounding
air temperature of above 40 °F (4.5 °C) or below
104 °F (+40 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.
English
13
Publicité
