Publicité
Les langues disponibles
Les langues disponibles
6
•
Flip unit back upright, making sure the waterline is not pinched.
•
Remove the drain hose from inside the dishwasher. Orient the drain hose
toward direction of sink. IMPORTANT: Route hose toward sink PRIOR
TO connection. Do not turn after attachment.
•
Attach drain hose elbow (Part G) to back of unit using pliers to install
the spring clamp (Part B).
7
D
•
Pre-level unit before positioning under counter by turning feet clockwise
to raise or counter-clockwise to lower. Maximum height the unit can be
raised with feet fully extended is 34.5" (876.3 mm).
•
Position unit under counter to verify that it is level. If adjustment is needed,
remove unit from under counter and adjust as necessary.
•
Once the unit is at a satisfactory height, insert leg leveler locking screw
(Part D) in back foot. Step 10 will complete the leveling process.
B
G
G
B
13
Publicité
