Publicité
Les langues disponibles
Les langues disponibles
Attaching Water Inlet and Drain Hose
4
•
Carefully flip the unit over. Remove the toe panel from the front of the
unit and retain for attachment to the front at a later time. Loosen the leg
levelers slightly.
5
•
Attach elbow joint to dishwasher as shown. Do not overtighten.
•
Attach hot water line to elbow. Use two wrenches to tighten to avoid
putting stress on the water inlet valve.
NOTICE
Avoid cross-threading! It will cause leaks. After attaching hose, temporarily
12
hook up the water supply then turn on water to check for leaks.
Publicité
