Technical Data - Husqvarna 327LS Manuel D'utilisation

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved
cutting equipment fitted. The table indicates the highest and lowest values.
The accessories are recommended for use in combination with the specified power heads and have been evaluated to
applicable ISO- and EN safety requirement standards by the Swedish Machinery Testing Institute.
1152414-32 Rev.2 2009-09-18
TECHNICAL DATA
3
2
327LDx 327LS
1,50/24,5 1,50/24,5
1,34/34 1,34/34
1,06/27 1,06/27
2700 2700
11000-11700 11000-11700
9300 9300
0,9/8400 0,9/8400
Yes Yes
Yes Yes
Walbro MB Walbro MB
Champion RCJ 6Y Champion RCJ 6Y
0,02/0,5 0,02/0,5
Zama C1Q Zama C1Q
1,06/0,5 1,06/0,5
11,2/5,1 10,6/4,8
94/97 92/98
1,6/1,2 2,6/1,5
2,2/1,5 2,6/1,5
3,1/4,1 2,2/4,1
4,1/5,8 5,4/7,6
–
English 49