28 www.aeg.com
7.1 Closing the door
Clean the door gaskets.
1.
2.
If necessary, adjust the door. Refer
to "Installation".
8. TECHNICAL DATA
Dimension
Rising Time
Voltage
Frequency
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
9. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
9.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar)
also, but for optimum performance in-
stall this appliance at a location where
the ambient temperature corresponds to
3.
Height
Width
Depth
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
SN
N
ST
T
If necessary, replace the defective
door gaskets. Contact the Service
Center.
850 mm
595 mm
635 mm
24 h
230-240 V
50 Hz
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C