CASO DESIGN Coffee Taste&Style Thermo Mode D'emploi page 31

 The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician. The manufacturer cannot be made responsible
for damages that are caused by a missing or damaged protective conductor.
12.7 Warning notices
Attention
Danger due to hot surface!
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
12.8 Rating plate
The rating plate with the connection and performance data can be founded on the bottom
of the unit.
13 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.
► Operate the device only with placed filterholder.
13.1 Display
H: Setting the hours
Min: Setting the minutes
On/Off: Start/Stop of brewing process, switching to TIMER mode
Press On/Off button once: The device will be switched on and the brewing process is
started. The red LED lights up
Press On/Off button twice: The device switches to TIMER mode, the white Led lights up
and the device will start brewing process once programed time is reached.
Press On/Off button three times: Process will be stopped, red and white LED turn off.
31