CLEANING AND MAINTENANCE
Before carrying on any cleaning or maintenance operation, make
•
yourselves sure you have disconnected before the equipment form
electrical supply.
To empty the bag, release the lower cylinder by pulling it
•
downwards and untie the drawstring on the bottom of the bag to
allow emptying. Once emptied, close the drawstring and reinsert
the lower cylinder by pushing it slightly upwards to allow fixing in
the appropriate hook. (Fig. 1)
Empty the collecting sack when the thickness of the insect collected
•
at its internal side overcome 15-20 cm or more , often the sack
mashes result to be obstructed.
If the collection bag is dirty, loosen the upper drawstring, remove
•
the bag and wash it with water.
Check periodically and regularly that the fan turns freely and that in
•
its external area there is no encrustation.
Clean the lamps from the accumulated dust by means of a soft
•
brush, do not use for cleaning water sprinkles.
If you notice to have captured useful insects, disconnect the
•
equipment , open the collecting sack and go away from site quickly
to let the insects come out without stinging you.
TECHNICAL SERVICE
If you have any question or problem relevant your TurbiLED, call
the local authorized distributor or the nearest Service Centre. Every
repairs should be carried on by an authorized Service Centre and also
ask always for original spare parts.
10