a
b
1
6
English
Install the base plate (optional)
Position the baseplate and gasket over
the holes in the mounting surface. Install
the mounting pieces and collars.
If the mounting surface does not have
three holes, unscrew the studs from the
baseplate.
Installation
Place the faucet and sealing ring on the
mounting surface.
Install the plastic washer, friction washer,
metal washer, and mounting nut.
If the mounting surface thickness is
greater than 1⅜", or if there is insuffi-
cient space, omit the plastic washer.
Tighten the mounting nut.
Tighten the screws.