HP Deskjet F4100 Guide D'utilisation page 7

(continued)
Label Icon
6
7
8
9
Status light overview
Several indicator lights inform you of the status of the HP All-in-One.
Label
1
2
3
4
The following table describes common situations and explains what the lights mean.
Light status
All lights are off.
The On light and one of the Paper
Type lights are on.
The On light is blinking.
The On light blinks quickly for 3
seconds and then is on steady.
The On light blinks for 20 seconds
and then is steady.
Name and Description
TIP: You can make up to 9 copies using the control panel (varies by model).
Check Print Cartridge lights: Indicates the need to reinsert the specified print
cartridge, replace the print cartridge, or close the print cartridge door.
Resume: Instructs the HP All-in-One to continue after a problem is solved.
A blinking Resume light next to the Resume button indicates the need to
load paper or clear a paper jam.
Cancel: Stops a print, copy, or scan job.
On: Turns the HP All-in-One on or off. The On button is lit when the
HP All-in-One is powered on.
Description
Paper Type lights (for the Paper Type button)
Check Print Cartridge lights
Resume light
On button
What it means
The HP All-in-One is turned off. Press the On button to turn on the device.
The HP All-in-One is ready for printing, scanning, or copying.
The HP All-in-One is busy printing, scanning, copying, or aligning the
print cartridges.
You pressed a button while the HP All-in-One is already busy printing,
scanning, copying, or aligning the print cartridges.
You pressed the Scan button and there was no response from the
computer.
Status light overview 7