Publicité
Les langues disponibles
Les langues disponibles
OPERATION
The appliance is equipped with the following control elements:
Pos.0: heater off
Pos.1: power 400W
Pos.2: power 800W (400+400=800W)
In the case that the heater is accidentally knocked over, the safety switch
in the base will turn off the device: reposition the carbon heater and it
will resume normal operation.
First use
Warning: run the appliance to eliminate the "new smell" and any oil
residue from the manufacturing process for at least 10/15 minutes.
During this operation, ventilate the room well to eliminate the "new
smell" that is given off by the appliance.
1) Insert the plug into the socket.
2) To turn on the stove and check the power, turn the knob, these
modes:
0= Off
1= 500W
3)
To switch the appliance off, turn the selector to the "0" off position
and remove the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use,
especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch off, unplug and wait
for before it has completely cooled down.
• Protect the parabola from dust to keep save its reflecting
characteristic.
• To clean the body use a soft damp cloth; do not use abrasive
products.
• The protection grill and the smocking net are very delicate; to clean
them only use your vacuum cleaner, paying attention not to damage
them.
• When the stove is not in use it is necessary to cover and put it in a
dry place. We advise to use the original packing to preserve it from
dust and humidity.
• The halogen heater (230V 400W) must be substituted with a special
tool: please contact a competent qualified electrician.
• If you decide not to use the appliance any more, we recommend
making it inoperative by cutting the power cord (after making sure
you have disconnected the plug from the socket) and make
dangerous parts harmless if children are allowed to play with them.
2= 800W
17
Publicité
