Error codes
The display shows...
Err C3
Err F102
Err F102
00:00
If the display shows an error code that is not in this table turn the house fuse off and on to restart the appliance. If
the error code recurs contact an Authorised Service Centre.
Cleaning
Problem
The water leaks out of the cavity embossment.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
14. ENERGY EFFICIENCY
14.1 Product Information and Product Information Sheet according to EU
Ecodesign and Energy Labelling Regulations
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
Check if...
The appliance door is closed or the door lock is not bro‐
ken.
The appliance door is closed.
The door lock is not broken.
There was a power cut. Set the time of day.
Check if...
There is too much water in the cavity embossment.
.........................................
.........................................
.........................................
AEG
BPB355061M 949499639
BPS355061M 949499640
81.2
A+
0.93 kWh/cycle
0.69 kWh/cycle
1
ENGLISH
57