Publicité
Les langues disponibles
Les langues disponibles
¡ Switch off the power supply and the gas
supply before you start the work. Ensure
that the information on the rating plate re-
garding voltage, gas type and gas pressure
comply with the local connection condi-
tions.
¡ Wear protective gloves so that you do not
cut yourself. Parts that are accessible dur-
ing installation may have sharp edges.
¡ Dimensions of the figures in mm.
17.2 Appliance dimensions
You will find the dimensions of the appliance here
17.4 Installing below a hob
If the appliance is installed below a hob, the following
minimum dimensions must be adhered to (including
substructure, if applicable).
Hob type
Induction hob
Full-surface induction hob
Gas hob
Electric hob
Secure the worktop to the built-in unit. Observe the in-
stallation instructions for the hob.
17.3 Installation below a worktop
Observe the installation dimensions and the safety
clearances when installing below a worktop.
To ventilate the appliance, the intermediate floor must
have a ventilation cut-out.
The minimum worktop thickness
the required minimum clearance
raised in mm
37
58
27
27
Installation instructions en
flush in mm
38
58
38
30
is determined by
.
in mm
5
5
5
2
21
Publicité
