Moulinex Masterchef Gourmet QA4081B1 Mode D'emploi page 16

3.1 - FITTING THE MINCER ATTACHMENT
• Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.
• Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment
with the appliance.
• Place the multi-function head (A3) in the horizontal position by pressing the button (a2) once again.
3.2 - ASSEMBLING THE MINCER HEAD
• Hold the body (F1) by the feed tube, with the wider opening uppermost.
• Insert the feed screw (F2) (long shaft first) into the body (F1).
• Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing
outwards.
• Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the
body (F1).
EN
• Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.
• Check the assembly. The shaft should have no play, neither should it be able to turn on its own. Otherwise,
repeat the assembly procedure.
3.3 - FITTING THE MINCER HEAD ON THE APPLIANCE
• Facing the attachment outlet (E), insert the assembled mincer head (F) inclined to the right, aligning
the two bayonets in the mincer head with the two notches in the attachment. Push the mincer head
home into the attachment and turn the mincer head anti-clockwise until it latches with the feed tube in
the vertical position.
• Place the removable tray (F8) on the feed tube.
3.4 - USAGE, TIPS AND DISMANTLING
• Make sure that the safety cover (A5) is locked correctly (clockwise) on the high-speed outlet (a4).
• Place a container to collect the preparation in front of the appliance.
• Run the appliance by turning the selector (A1) to speed "3" or "4".
• Push the meat, piece by piece, down the feed tube, using the pusher (F7). Never push the ingredients
down the feed tube with your fingers or any other utensil.
- You can chop up to 3 kg of meat (gristle, bone and sinew removed).
- Maximum time of use: 10 minutes.
• Leave your appliance to cool down completely before using again.
• To stop the appliance, turn the selector to "0" speed and wait for the appliance to come to a complete
stop.
• Unlock the mincer head in the reverse order of the assembly.
Tips:
- Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it
into pieces of approximately 2 x 2 cm).
- Make sure that frozen meat is thoroughly thawed.
- At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any
meat remaining in the machine.
4 - GRATING / SLICING (DEPENDING ON MODEL)
ACCESSORIES USED :
- Attachment holder (E)
- Assembled vegetable slicer (G)
- Drums (depending on model)
4.1 - ASSEMBLING THE ACCESSORIES
• Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.
16