Publicité
Les langues disponibles
Les langues disponibles
PROBLEM:
The sound on
the parent unit is
interrupted
High-pitched
tone
In case the babyphone still does not operate correctly, please disconnect
the power adapters and remove the batteries. Wait for some minutes
and install batteries and connect the power adapters again. In case the
malfunction still persists, please contact your dealer.
9 CONTENTS
1
ECO MODE ......................................................................2
3
2
OVERVIEW
2.1
OVERVIEW PARENT UNIT .............................................3
2.2
OVERVIEW BABY UNIT ..................................................4
2.3
OVERVIEW DISPLAY ......................................................5
3
INSTALLATION
3.1
PARENT UNIT ..................................................................6
3.2
BABY-UNIT ......................................................................6
3.3
RECOMMENDATIONS ....................................................7
4
USING YOUR BABY MONITOR
4.1
POWER ON/OFF .............................................................8
4.2
LINK CHECK ....................................................................8
4.3
LANGUAGE .....................................................................8
4.4
MONITORING ..................................................................9
4.5
TALK BACK ......................................................................9
4.6
SENSITIVITY ...................................................................10
4.7
SOUND ALERT ................................................................11
POSSIBLE SOLUTION:
• The microphone sensitivity level of the baby unit may
be set too low. Increase the sensitivity level of the
baby unit.
• The parent unit and the baby unit are too close to
each other. Make sure the parent unit and baby unit
are at least 1.5 metre away from each other.
• The speaker volume of the parent unit maybe set too
high. Decrease the volume of the parent unit.
26
Publicité
