Publicité
Les langues disponibles
Les langues disponibles
NEVER install normal batteries in the baby unit. Normal batteries
cannot be charged. Risc of explosion if battery is replaced by an
1. Remove the battery compartment cover.
2. Insert 4 x AA rechargeable batteries, observing their
polarities, into the battery compartment on the parent Unit. Only use
the supplied batteries with the following specifications:
voltage / capacity: 1.2V / 1300mAh or more
material / size: NiMH, AA, HR6, penlite
3. Reattach the battery compartment cover.
4. Connect the output plug of the mains adapter to the DC
socket on the side of the baby unit and the mains adap-
ter to the wall mains supply.
5. The battery indication
remains lit, even when the batteries are fully charged)
Depending on the capacity of the batteries, It will take about 24 hours to
fully charge the batteries.
The power adapter for the baby-unit is inclusive. Rechargeable batteries
for the baby-unit are exclusive.
3.3 RECOMMENDATIONS:
•
Never place the baby unit inside your baby's cot, bed or playpen.
•
MAKE SURE THE BABY UNIT AND MAINS ADAPTOR CABLE ARE
ALWAYS OUT OF REACH OF THE BABY.
•
Avoid exposure of the units to moisture or liquid.
•
Clean the units with a damp cloth.
•
Do not expose the units to extreme heat or direct sunlight.
ATTENTION:
incorrect type.
comes on and charging begins (this LED
7
Publicité
