Remarks regarding FULL ECO
Lullaby playback and a maximum sensitivity (level 5, see chapter 4.6) will
temporarily disable the Full ECO feature if Full ECO setting is set to ON.
The icon
Attention: The link check is not active in Full Eco mode; see the next
chapter.
4.15 LINK CHECK:
Automatic:
When the FULL ECO is disabled, the babyphone constantly checks the
link between the baby-unit and the parents-unit:
•
As soon and as long the parent unit is in contact with the baby unit,
the link-LED
•
When the baby unit gets out of range (or is powered off), the link-LED
on the parent unit starts blinking and the text [ SEARCHING ]
comes on the display.
•
In case the link is not restored within 30 seconds, a beeptoon sounds
every 10 seconds and the text [ NOT LINKED ] comes on the display.
•
Once the link between the parent unit and the baby unit is restored,
the link-LED will light steadily and the text [ NOT LINKED ] will disap-
pear from the display.
FULL ECO indication:
enabled
however will still be on.
on the parent unit lights steadily.
turns on when the FULL ECO mode is
18