SOMFY V500 Connect Mode D'emploi page 31

INDOOR MONITOR AND DOOR STATION SETTINGS
INDOOR MONITOR
The screen comes on automatically when movement is detected at a distance of approx. 25 cm or when it is touched.
in the event of a power cut, the settings are stored in the monitor.
Access the visualisation screen of the door
station (surveillance mode active for 120s).
Gate opening/closing.
ADDING AN RTS PRODUCT
You can radio control up to 5 RTS products or groups of Somfy RTS products on condition that they are within range of the
monitor.
To add an RTS product or to go further with the advanced settings of your indoor monitor (date, hour, ring
tone, ring volume setting, etc.), scan the following QR code:
DOOR STATION
ADJUSTING THE SPEAKER VOLUME
To adjust the speaker volume, you must use the screwdriver supplied
to turn the button on the back of the door station:
• clockwise to increase the volume,
• anti-clockwise to reduce the volume.
ACTIVATING OR DEACTIVATING THE AUDIBLE BEEP
OF THE CALL BUTTON
An audible beep sounds when the visitor presses the call button.
To deactivate or reactivate this beep, press the call button for 5 seconds until the status confirmation beep is heard.
Function available in the future
Live
Gate
Pedestrian gate
Opening of the gate's electric latch.
Settings
Access to the advanced settings.
MY HOME RTS STEERING
Roller Shutter Garage Door Swinging Shutter Channel 4 Awning
Photos
Access to the photos of missed visits or
taken manually.
Control from home
Access to the Somfy RTS equipment
control screen.
Button to adjust the
speaker volume
29