Easyteach-Philosophy - Rechner Sensors EasyTeach IO-Link Notice D'utilisation

EasyTeach-philosophy

Adjustment „empty"
Adjustment „full"
Factory reset*
Test
Output
Antivalent
Antivalent
N.O. or N.C.
N.O
N.C
EasyTeach-Chart
The EasyTeach charts are used for optical menu navigation. They illustrate the flashing behaviour of the
LED and the switching of the output at the various menu items
Classic sensor - antivalent
Classic sensor - normally open or normally closed
*If existing
Adjustment ETW:
The EasyTeach menu starts, by activating the EasyTeach con-
nection (Teach wire / Teach pin with the supply voltage UB+).
The menu goes through the different settings. The desired
Menu point is selected when breaking the connection
Adjustment ETB:
Pushing the EasyTeach-Button activates the EasyTeach menu.
The menu goes through the different settings. The desired menu
item is selected by releasing the EasyTeach-Button
Adjustment ETM:
Holding the EasyTeach magnet on the teachspot activates the
EasyTeach menu. The menu goes through the different settings.
The desired menu item is selected by removing the magnet
Connection EasyTeach-Connection
Cable
Connector
Cable
Connector
Connector
Adjustment „empty"
Initializing „empty"
Adjustment „full"
Initializing „full"
Factory reset
Test
LED
Green - Classic
Yellow - NormLine
Grey wire
Pin 5
White wire
Pin4
Pin2
Adjustment "empty"
Initializing "empty"
Adjustment "full"
Initializing "full"
Test
LED
Yellow - Classic
Yellow - NormLine
Output A1 Output A2
Output A1 Output A2
Output A1 Output A1
Output A1 Output A1
Output A1 Output A1
Serie NormLine
Not available
Leerabgleic
Leerabgleich Initialis
Vollabgleic
V
V
Te
23