Publicité
Les langues disponibles
Les langues disponibles
V1.1
• Kickback can also damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1.
Maintain a firm grip on the tool and position your body and arms to allow
you to resist a kickback. Kickback will propel the tool in the direction
opposite the impact socket's direction of rotation. The tool may pull out of
your grasp.
a.
Use clamps or a vice to hold down smaller workpieces.
2.
Only use an impact socket designed for the tool.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
1.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the impact wrench to rain, snow, frost or any other damp
or wet conditions. Water entering a tool will increase the risk of electric
shock.
BATTERY SAFETY
WARNING! Only charge a battery with a charger designed for that
purpose. Do not use modified chargers or a charger that does not
specify the voltage, amperage or recharge rate. Improper charging can
lead to battery rupturing.
WARNING! Do not charge a damaged or frozen battery. Contact your
local municipality for proper disposal procedures.
Consult the Safety Data Sheet (SDS) for your battery before use or
maintenance.
1.
Do not expose the battery to heat or throw it in a fire. The contents are
flammable and the battery may explode. Remove any source of ignition
such as an open flame or a tool like a heater from the area.
Page 7
CORDLESS IMPACT WRENCH
www.princessauto.com / 1-800-665-8685
9049016
Publicité
