Publicité
Les langues disponibles
Les langues disponibles
V1.1
INSTALL EXTERNAL BATTERY PACK
1.
Check the battery power level before each use.
•
The battery is not fully charged out of the carton. Charge the battery
before first use.
2.
Install the battery by aligning the rib on the battery with the groove on
the battery port and push forward until the latch clicks.
3.
Remove the battery by pushing the battery lock button and pulling the
battery free.
OPERATION
The battery is not fully charged out of the carton. Charge the battery before
first use.
1.
Set the tool' s trigger switch to the OFF position before installing or
removing the battery. This will help prevent injuries due to accidental
starts.
2.
Check the battery power level before each use.
3.
Install the battery by aligning the rib on the battery with the groove on
the battery port and push forward until the latch clicks.
4.
Remove the battery by pushing the battery lock button and pulling the
battery free.
5.
To facilitate cooling of the battery pack after use, avoid placing the
charger or battery pack in a warm environment such as in a metal shed or
an uninsulated trailer.
OPERATING THE IMPACT WRENCH
1.
The trigger lock has multiple positions: left for forward, center to lock
the trigger and right for reverse. Push the button to the side that is
appropriate for the task.
2.
The LED worklight will illuminate the material while the trigger is held.
3.
Release the trigger to stop the tool.
4.
Push the trigger lock to the center position to prevent an accidental start.
5.
Remove the battery pack once the job is complete and place in the
charger.
Page 11
CORDLESS IMPACT WRENCH
www.princessauto.com / 1-800-665-8685
9049016
Publicité
