Publicité
Les langues disponibles
Les langues disponibles
9049016
smoothly under no load, but does not run smoothly under load, then
excessive pressure is being used.
4.
Check if the impact wrench's moving parts are misaligned or binding
before each use. Correct the issue before using the impact wrench to
avoid an injury or damage to the tool.
5.
Always be aware of the position of your hands relative to the impact
wrench. Avoid awkward hand positions where a sudden slip could cause a
hand to move into the impact socket. Never reach behind or beneath the
impact wrench.
6.
Only use accessories that are specifically designed for use with the impact
wrench. Ensure the impact socket is tightly installed.
7.
Only use an impact socket that exceeds the Speed rating (see
Specifications).
8.
Before using the impact wrench on a workpiece, test the impact wrench
by running it at the highest speed rating for at least 30 seconds in a safe
position. Stop immediately if there is any abnormal vibration or wobbling.
Check the tool to determine the cause.
9.
Never touch the impact socket or workpiece during or immediately after
use. They may be hot and could inflict a burn injury.
10. Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
11.
Never use a tool with an impact socket that is cracked or worn. Change
the impact socket before using it.
12. Do not place the impact wrench down until the impact socket has stopped
moving. The impact wrench may catch the surface of work material and
wrench itself free, causing injury to the user or others in the work area.
13. Never point the impact wrench towards yourself. It could inflict an injury.
KICKBACK PRECAUTIONS
Kickback is a sudden reaction when the impact wrench snags or is caught on
the material. If kickback occurs:
• The impact socket may pass over a body part, causing an injury.
• The tool may strike bystanders.
www.princessauto.com / 1-800-665-8685
CORDLESS IMPACT WRENCH
V1.1
Page 6
Publicité
