Publicité
Les langues disponibles
Les langues disponibles
9049016
This notice indicates that a specific hazard or unsafe practice will result in
NOTICE!
equipment or property damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing and gloves designed for the work environment,
materials and tools.
a.
Do not wear gloves when operating a tool that can snag the material
and pull the hand into the tool.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
2.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
www.princessauto.com / 1-800-665-8685
CORDLESS IMPACT WRENCH
V1.1
Page 4
Publicité
