THOMSON ROC1128PHI Mode D'emploi page 4

Replacement Remote for
PHILIPS SERIES: TV/LCD/LED/HDTV
Thank you for your decision for a Thomson product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference.
This remote control can by default control 90%
models of PHILIPS brand, there´s no need to set it
up. lf the remote doesn't work, please choose one
of the setup methods described in chapter 5.
The keys
1. Power TV ON/OFF – Indicator LED
2. Suspends play and stops on an image
(DVD, BlueRay...)
3. Stop the disc (DVD, BlueRay ... )
4. Play a disc (DVD, BlueRay ... )
5. Goes backward (DVD, BlueRay ... )
6. 3D Mode ON/OFF
7. Show the Electronic Program Guide
(if supported by the TV)
8. Shift to TV
9. Input Signal Source
10. Record
11. Fast Forward (DVD, BlueRay ... )
12. AMBILIGHT
13. Picture Size
14. Streaming app menu
15. Info
16. Options and Tools
17. HOME
18. Channel List
19. Use when watching TV to see what´s on
other channels or to highlight/select On-
Screen options
20. Exit Menu
21. Return/Back Key
22. Channel +/-
23. Volume +/-
24. Use to select a variety of on-screen options
25. Numeric keys 0 – 9 to enter channel
numbers
26. Subtitle
27. Teletext ON/OFF
28. Turn your TV sound ON/OFF
1. Explanation of the Note and Warning
symbol
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Replacement Remote Control
• 2x AAA Batteries
• This operating instructions incl. Code List
3. Safety notes
• Do not use the Universal Remote Control in
moist or wet environments and avoid spray-
water contact.
• Do not expose the Universal Remote Control
to heat sources or direct sunlight.
• Do not drop the Universal Remote Control.
• Never open the Universal Remote Control. It
contains no user-serviceable parts.
• As with all electrical devices, keep the
Universal Remote Control away from
children.
Warning
• When inserting batteries, note the
correct polarity (+ and - markings) and
insert the batteries accordingly. Failure to
do so could result in the batteries leaking
or exploding.
• Only use batteries (or rechargeable
batteries) that match the specified type.
• Before you insert the batteries, clean the
battery contacts and the polar contacts.
• Do not allow children to change batteries
without supervision.
• Do not mix old and new batteries or
batteries of a different type or make.
• Remove the batteries from products
that are not being used for an extended
period (unless these are being kept ready
for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of
children.
• Never open, damage or swallow
batteries or allow them to enter the
environment. They can contain toxic,
environmentally harmful heavy metals.
4. Getting started – installing the Batteries
Note
• Use 2 AAA batteries
• Remove the battery cover from bottom
of remote.
• Check the +/- polarity on the batteries
and inside the compartment.
• Insert the batteries.
• Slide the battery holder back into the
remote until the clips locate.
Note – Code Memory Note – Code Memory
This remote control saves the settings during
battery change.
5. Setup
This remote control can by default control 90%
models of PHILIPS brand, there´s no need to
set it up. lf it doesn't work, please choose one
of the following setup methods 5.1 or 5.2.
2