Bosch NIT8660UC Manuel D'utilisation page 14

en-us Operation
lights up in the timer display.
a
a The indicator above kitchen timer lights up.
Set the desired time in the settings area.
2.
Press kitchen timer to confirm.
3.
a The time starts to count down after a few seconds.
a When the time has elapsed, a beep sounds.
the timer display.
a The indicator above kitchen timer blinks.
Press any key to turn off the signals. After 10 seconds
4.
the signals stop automatically.
Changing or canceling the kitchen timer
Press kitchen timer.
1.
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to ⁠ ⁠ .
Press kitchen timer to confirm.
3.
6.6 Count-up timer
The Count-up timer displays the time that has elapsed
since activating the function.
The Count-up timer works independently from the cooking
zones and from other settings. This function does not au-
tomatically switch off a cooking zone.
Starting the Count-up timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press count up timer.
▶
lights up on the timer display.
a
a The indicator above count up timer lights up.
a The timer starts to count up.
Canceling the Count-up timer
Press count up timer.
1.
a The timer stops running.
Press count up timer again.
2.
a The timer is cleared and turns off.
6.7 SpeedBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily in-
creases the top output of the selected cooking zone.
Restrictions for using the SpeedBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available,
play of the selected cooking zone. The power level
set automatically.
14
blinks in
and blink on the dis-
is
Activating SpeedBoost®
Press to select the cooking zone.
1.
Touch speed boost.
2.
lights up in the cooking zone display.
a
Deactivating SpeedBoost®
The function may be deactivated automatically to avoid
overheating. This serves to protect the internal electronic
components of the cooktop.
Press to select the cooking zone.
1.
Press speed boost.
2.
goes out.
a
a The cooking zone switches to power level ⁠ .
Notes
¡ In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.
¡ If you have set a power level before activating the func-
tion, this power level is used automatically after the
function has been deactivated.
6.8 ShortBoost
With this function you can heat cookware faster than with
power level ⁠ .
Recommendations for using this function:
¡ Always use cookware that has not been pre-heated.
¡ Use cookware with a flat base.
¡ Do not use cookware with a thin base.
¡ Never leave empty cookware, oil, butter or lard to heat
up unattended.
¡ Do not place a lid on the cookware.
¡ Place the cookware on the center of the cooking zone.
¡ Ensure that the diameter of the base of the cookware
matches the size of the cooking zone.
¡ Refer to the information on cooking with induction for in-
formation on the type, size and positioning of the cook-
ware. → Page 9
Restrictions for using the ShortBoost function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available,
play of the selected cooking zone. The power level
set automatically.
and blink on the dis-
is