Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Heating element
2.
Lid
3.
Basket with handle
4.
Exterior
5.
Handle - exterior
6.
Reset-button
7.
Storage for power cord
8.
Control lamp - red
9.
Thermostat button
10. Thermostat lamp - green
11.
Reservoir - enameled
3
before the first use
Attention: The capacity of this double fryer is 2 x 1800 Watts. Therefore check the maximum of your electric circuit
before you plug in both fryers.
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after
unpacking for any visible damage, possible from transportation. Place the appliance on a stable and heat resistant surface.
Remove the lid and the basket. Take out the heating element by pulling it straight up and also remove the reservoir.
Clean the lid, the basket and the reservoir with warm soapy water. Dry the parts thoroughly. Make sure that the parts are
completely dry.
Wipe the exterior with a damp cloth and dry thoroughly. Assemble the fryer.
Fill the reservoir with liquid frying oil between the minimum and maximum level, approx. 2,5 liters. Ensure that you don't add
less than the minimum capacity or over the maximum capacity. Inside the reservoir you will find two lines which indicate the
minimum and maximum level.
Attention: this fryer may only be used with liquid frying oil. Never use hard fats.
The handle of the basket can be stored in the basket by folding it in. Squeeze the two handle wires together and
push the handle forwards over the locking clip.
Only store the handle when the oil is fully cooled down. Ensure the handle is folded back before operating the fryer
again!
For the best result in a cool zone fryer, always fry without using the lid.
6
7
10
9
8
11
English
1
2
3
5
4
13
•
Publicité
