S&P CTB ECOWATT PLUS Mode D'emploi page 40

6.2. DESCRIPTION
The PROSYS ECOWATT is used as a visualization and control supplement. Following functions are possible:
EN
• Display parameters and variables
• Save settings
• Display settings
• Confi gure your device and operating modes
• Search units (channels) in the network (previously each unit should be confi gured with different number of channels)
The console has a LCD display of 2x16 characters,
4 buttons and 3 LED's.
• Button "Up"
• Button "Down"
• Button "+"
• Button "-"
• LED power supply ON
• LED "activity" Modbus
• LED error
6.3. USING THE CONSOLE
When modifying the confi gured parameter, the buttons on the console have the following functions:
Button Function
Increase parameter value
Decrease the parameter value
Enter
Exit
When navigating through the menus, the button function is different and depends on the existing indications on the display.
Each button performs the function indicated just above it.
Examples:
ENTRAR PASSWORD:
1
40
1 1 OK
Modbus RTU v3.1
Button Function
Modify the value of 1st digit
Modify the value of 2nd digit
Modify the value of 3rt digit
OK. Validate
Button Function
NO = Exit
Reduce cannel value
Increase cannel value
YES = Validate
SOLER&PALAU