Publicité
Les langues disponibles
Les langues disponibles
Measured input power [W]
Measured output power [W]
Calculated efficiency [%]
Minimum calculated efficiency [%]
Ambient temperature [°C].
Input voltage [V]
Frequency [Hz].
Test period [min]
Input measured at the beginning
[W]
At the end [W]
3. General Description
The manual is intended to assist in safe and reliable use. The product is designed and manufactured
strictly according to technical specifications using the latest technology and components and
maintaining the highest quality standards.
To ensure the long and reliable operation of the device, make sure to operate and maintain it properly
following the guidelines in this instruction manual. The technical data and specifications in this manual
are up-to-date. The manufacturer reserves the right to make changes to improve the quality. Taking
the technical progress and the possibility of reducing noise into account, the unit is designed and built
in such a way that risks resulting from noise emissions are reduced to the lowest possible level.
4. Safety of use
CAUTION! Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire, and/or serious injury or death.
The term "device" or "product" in the warnings and the description of the instructions refers to:
MIG Welding machine
4.1. General
• Take care of your own safety and that of third parties by reading and following the guidelines
contained in this manual.
• Only qualified persons may be allowed to start up, operate, handle and repair the device.
• The device must not be used for purposes other than those for which it is intended.
4.2. Guidelines for securing fire hazardous work
Preparing the building and rooms for fire hazardous works consists in:
cleaning the rooms or places where the work will be carried out of any flammable materials and
contamination;
• move all flammable and non-flammable objects in flammable packaging to a safe distance;
• protect materials which cannot be removed by covering them, for example, with metal sheets,
gypsum boards, etc . against the effects of, for example, welding spatter;
MIG
5 880
4 893
83
Idle power measurements
CAREFULLY READ AND UNDERSTAND THIS MANUAL
BEFORE STARTING THE WORK.
MIG
MIG
3 530
2 579
3 010
2 199
85
85
83
20
230
50
10
24.29
23.81
MMA
MMA
5 348
3 399
4 558
2 962
85
87
MMA
2 527
2 229
87
Publicité
