HP PS200 Guide De Démarrage Rapide page 6

Function & LED guide
Function Action
Scan button The button initiates a scan if the document is detected in the feeder.
NOTE: Scan button will only work with HP WorkScan software which can be downloaded
at hpworksolution.com/setup.
Power button Press to power on.
Ready to scan or scan is in progress.
Press & hold for 5 seconds to power off.
Sleep mode.
Simplex/Duplex button In simplex mode. Scanner is preset to simplex scanning.
In duplex mode.
USB connecting Connection in progress.
USB connected Connection with the computer is established.
Paper jam Open the scanner and remove the jam.
Cover open Close the cover properly.
Paper detection Paper insertion into any initially empty feeder.
Quick start guide
LED color
N/A
Blinking green
Solid green
x5
Blinking green (5 times)
Slow blinking green
Solid green (Simplex LED)
Off (Duplex LED)
Off (Simplex LED)
Solid green (Duplex LED)
Blinking green
Solid green
Blinking red
Blinking red
x3
Fast blinking green (3 times)
EN | 5