HP PS200 Guide De Démarrage Rapide page 4

Operating the scanner
NOTE: Multipage documents can be scanned through the top of the scanner using the document extension plate.
However, the front feed tray and rear slot are for single documents only.
A6 A5 A4
Quick start guide
1
Make sure that the
scanner is turned on.
3
Center your document
with the paper size marks
on the scanner.
NOTE: Documents must be inserted
into the center of the feeder when
using the front feed tray. Improper
insertion will cause the scanner to
not recognize the document.
A6 A5 A4
2
Insert your document into
the scanner using the front
feed tray, rear slot, or
document extension plate.
Make sure your document is
facing down when using any
of these methods to scan.
NOTE: Use only one scanning method
at a time.
4
Activate the scan from the
software or press the scan
button on the scanner to
start the scan.
NOTE: Press the simplex or duplex button
for single- or double-sided scanning
before activating the scan. Keep in mind
selecting the scan method in the
software can override what is selected
on the scanner. The scan button only
works with the HP WorkScan software.
EN | 3