yeep.me WEEK Mode D'emploi page 19

WALK ASSIST MODE
Long press button for 2 seconds, the bike will enter walk assist mode.
ERROR CODES INDICATIONS
When the e-bike drive system fails, it will stop working, and the display will show
the error code on the screen automatically and flash. The error code will not stop
showing on the screen until the problem is solved, even though turn off the display.
The reason for the error is shown in the list of error code.
ERROR CODE LIST
Code Definition
04 throttle doesn't turn back to zero position
05 throttle failure
07 overvoltage protection
08 failure of motor's hall signal wire
09 failure of motor's phase wire
11 failure of the controller's temperature sensor
12 failure of the current sensor
13 failure of the temperature of the battery
14 failure of the temperature of the motor
21 failure of the speed sensor
22 failure of the BMS communication
30 communication failure
WARNING : The product is designed to travel at a speed of 25 km/h. Ensure you are
following the usage restrictions of this product in terms of the road safety norms of
the country where you are using it.
WARNING : The user must comply with the requirements of national regulations
when using the bicycle on public roads, including compliance with the Highway Code.
The manufacturer declines all responsibility if the driver of the bicycle does not
comply with the regulations in force.
19
EN