Bose L1 Pro32 Manuel D'instructions page 12

Setup
Setup Scenarios
The L1 Pro32 can be placed on the floor or on an elevated stage (see Assembling the Power
Stand and Array on page 7).
WARNING: Do not place the equipment in an unstable location. The equipment could
become unstable leading to a hazardous condition, which could result in injury.
CAUTION: The power stand should not be placed anywhere that may block the
ventilation holes at the rear/bottom of the L1 Pro32. Operating directly on sand or grass
could cause debris to enter the product through vent openings and result in the L1 Pro32
not functioning properly.
All of the following setup scenarios require at least one Sub1 or Sub2 bass module. For proper Sub1/Sub2
settings, see the Sub1/Sub2 owner's guide at PRO.BOSE.COM.
Musician (with Sub)
MUTE
INST
12 • English
L1 Pro32
MUTE
INST
PRO.BOSE.COM
L1 Pro32 Portable Line Array • Owner's Guide