Optelec Compact 10 HD Manuel D'utilisation page 44

Optelec Compact 10 HD & Compact 10 HD Speech
and if needed enter the pin code. Refer to the speaker's or headphone's manual for the pin code of
the device.
When the device is paired, to connect the speaker or headphone, tap the device. You will be asked
to connect or forget the device. Tap the "Connect" button to make the connection.
To indicate that a device is connected, the connected device will have a checkmark and will be
displayed in blue.
To unpair / forget a device, tap the "Forget" button. The device will be removed from the list with
paired devices.
Note: Only Bluetooth version 4.0 or higher headsets and speakers are supported.
Line
This menu item enables you to change the reading line position to one of its six positions; horizontal
top, horizontal center, horizontal bottom, vertical left, vertical center, vertical right. By default, the
reading line is horizontally set to the centre of the screen.
Buttons
This menu item enables you to change the button bar position to one of two positions: bottom or
side. Depending on your preference, you could change the position of the button bar to the bottom
or side of the screen. The default setting is "Bottom".
43 English