Petromax HK150 Mode D'emploi page 19

Step 7A
• Push the lever of the rapid preheater downward, and immediately ignite the flowing fuel with a lighter.
Step 7B
(with new mantle only)
• With a newly installed mantle, close the lever after approx. 10 seconds. Let the mantle burn down
completely until appears dyed grey, and make sure that the mantle has no black bits.
• Finish by pushing the lever downward and immediately ignite the flowing fuel.
Step 8
• Repeatedly push the hand pump's plunger to keep the pressure at 1.5 bar.
• The rapid preheater will now preheat the carburettor. It must be preheated for at least 90 seconds.
DE
EN
FR
ES
TW
RU
KR
JP
FI
SE
19