Helios MiniVent M1/150 Notice De Montage Et D'utilisation page 21

Installation and Operation Instructions
CHAPTER 4
FUNCTION
CHAPTER 5
CLEANING/
DISMANTLING
m
DANGER
m
DANGER
MiniVent M1/150 (Standard model)
4.0 Functional description M1/150
The M1/150 MiniVent mini fan can be selectively operated with a commercially available light switch in Power mode
or Eco mode.
By controlling the speed with the on/off switch MVB (Accessories), the M1/150 MiniVent can be used in two settings.
5.0 Cleaning
m
DANGER!
An insulation fault may result in electric shock!
Before cleaning, isolate the fan from the mains power supply and secure against being switched on again!
– Clean facia, protection guard and visible casing parts with a damp cloth
– Do not use aggressive, paint-damaging cleaning agents!
– High pressure cleaners or jet water is not permitted!
5.1 Dismantling of the facia
m
DANGER!
An insulation fault may result in electric shock!
1. Before dismantling facia, isolate fan from mains power supply and secure against being switched on again!
2. By pulling on the outer edges, the facia ò can be unlocked and removed (fig.2/3).
fig.2
ò
By pulling on the outer edges,
the four snap-in hooks will
unlock
fig.3
Remove facia
5
ò
EN