Publicité
Les langues disponibles
Les langues disponibles
58 www.electrolux.com
6.1 Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Press and hold buttons (4) and (5) at
the same time until the indicators of
buttons (3), (4) and (5) flash.
3. Press button (3).
• The indicators of buttons (4) and (5)
go off.
Water hardness
French
mmol/l
degrees
(°fH)
91 - 125
9.1 - 12.5
76 - 90
7.6 - 9.0
65 - 75
6.5 - 7.5
51 - 64
5.1 - 6.4
40 - 50
4.0 - 5.0
33 - 39
3.3 - 3.9
26 - 32
2.6 - 3.2
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
< 7
< 0.7
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicator of button (3) continues
to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the setting of the
water softener, e.g.
4. Press button (3) again and again to
change the setting.
5. Deactivate the appliance to confirm
the setting.
Water softener
adjustment
Manual
Elec-
tronic
1)
10
2
1)
9
2
1)
8
2
1)
7
2
1)
6
2
1)
1)
2
5
1
4
1
3
1
2
2)
2)
1
1
= level 5.
Publicité
