RIB BOSS 24V SLAVE Mode D'emploi page 37

CORNER TRACK BLOCK TUBING AND LEVER FIXING
- Insert the lever into the sleeve and the welded bushing into the square driving shaft (Fig. 18).
- Begin to lock the pins positioned on the track shaft into position (Fig. 19-20) on the centring bush and relative lock nuts (Fig. 21).
- Fix the lever to the tubing tight with locking pin and lock nut (Fig. 22-23).
- With the help of the handles inserted in the relative realease mecanism, mechanically release the operators (Fig. 24-25)
- Verify the correct movement of the door and then lock the motors again.
- Lubricate the door's levers and guides.
18
21
24
37
19
22
25
G
B
20
23