Mopar 82212137 Mode D'emploi page 8

8
32. Remove the ground stud (1) located near the TIPM on
the inner fender.
33. Install the ground eyelet (2) to the ground stud (1) and
re­install to the inner fender.
34. Close the hood, adjust if necessary.
35. Open the driver side door.
36. Using trim stick C­4755 or equivalent, remove the
driver side scuff plate (1).
37. Partially remove the weatherstrip.
38. Using trim stick C­4755 or equivalent, remove the
driver side lower kick plate (1).
Sep 30, 2010
4280274
K6860943 REV 1