Mopar 82212137 Mode D'emploi page 4

4
11. Route a generous length of the harness (1) behind the
coolant recovery bottle toward the TIPM.
12. Tuck the harness (1) under the upper grille air deflec­
tor (2).
13. Connect the hood latch cable (2) to the hood latch (1).
14. Connect the hood ajar switch harness (3) to the hood
latch (1).
15. Pull on the harness (1) from inside the engine com­
partment to eliminate any excess slack.
16. Using a zip tie (2) from the kit, secure the harness (1)
to the existing vehicle harness.
17. Cut the excess off the zip tie (2) and attach the upper
grille air deflector to the upper radiator crossmember.
Sep 30, 2010
4280274
K6860943 REV 1