Mopar 82212137 Mode D'emploi page 12

12
57. Remove the four fasteners (1) and separate the re­
tainer bracket (2) from the WIN. Save the bracket and
fasteners for re­use.
58. Attach the kit supplied WIN to the retainer bracket (2)
using the four fasteners (1) removed in the previous
step.
59. Remove the glovebox and the glovebox liner (1).
NOTE: The antenna will locate from the rear of the I/P
between the passenger side airbag (3) and the glove
box opening support (4).
60. Locate the retainer locations for the remote start an­
tenna on the instrument panel.
61. Install the kit supplied remote start antenna (2) using
the fasteners (1) also supplied in the kit. The antenna
must be installed with the harness facing towards
the WIN module area.
Sep 30, 2010
4280274
K6860943 REV 1