Kenwood KDC-BT700DAB Mode D'emploi page 15

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The unit answers the call automatically if [AUTO ANSWER] is set to a
selected time. ( 14, Answer incoming call automatically)
During a call:
• If you turn off the unit or detach the faceplate, the Bluetooth
connection is disconnected.
The following operations may differ or not available depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
number buttons (1 to 6).
Reject a call
Press
End a call
Press
or the volume knob or one of the
.
.
To
While talking on the first incoming call...
Answer another incoming call
and hold the current call
Reject another incoming call
While having two active calls...
End current call and activate
held call
Swap between the current
call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free and
private talk modes
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item ( 14), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
On the faceplate
Press .
Press .
Press .
Press .
Turn the volume knob during a
call.
• This adjustment will not affect the
volume of the other sources.
Press during a call.
• Operations may vary according to
the connected Bluetooth device.
.
ENGLISH
13