Midi Settings; Special Functions - HQ Power VDPC146 Mode D'emploi

9.

Midi settings

9.1 MIDI-IN mode
1. Hold the RECORD button.
2. Press flash button 1 three times in PRESET A.
3. Release the RECORD button.
The display now shows CH1, indicating that the device is in the MIDI-IN mode.
4. Press the desired flash button (1 – 16) to assign this MIDI channel to this DMX channel.
5. Hold the RECORD button.
6. Press the REC EXIT button to leave this mode.
9.2 MIDI-OUT mode
1. Hold the RECORD button.
2. Press flash button 2 three times in PRESET A.
3. Release the RECORD button.
The display now shows CH0, indicating that the device is in the MIDI-OUT mode.
4. Press the desired flash button (1 – 16) to assign this MIDI channel to this DMX channel.
5. Hold the RECORD button.
6. Press the REC EXIT button to leave this mode.
9.3 Receiving a File
1. Hold the RECORD button.
2. Press flash button 3 three times in PRESET A.
3. Release the RECORD button.
The display now shows IN, indicating that the device is ready to receive a file.
4. All other operations will be disabled during the reception of the file. The reception will stop automatically at
the end of the file or when mistakes occur.
9.4 Sending a File
1. Hold the RECORD button.
2. Press flash button 4 three times in PRESET A.
3. Release the RECORD button.
The display now shows OUT, indicating that the device is ready to send a file.
4. All other operations will be disabled during the reception of the file. The transmission will stop automatically
at the end of the file or if an error occurs.

10. Special functions

Fade Time
The amount of time required to dim the output from 100 to 0% or vice versa.
Single Chase
The scenes are executed one by one and NO is showing on the display. Adjust the speed with the SPEED fader.
Mix Mode
All selected programmes are executed synchronously, with each programme having its own chase speed.
Fade Time & Chase Speed Indications
When the time is more than 1 min, the indication includes 2 dots e.g. 1 minute and 15 seconds is displayed as
1.15.
When the time is less than one minute, the indication only has one dot e.g.11.5 seconds is displayed as 11.5
Transmit and Receive MIDI files
• Open-loop mode
TRANSMITTER
MIDI out
V. 02 – 21/10/2013
VDPC146
RECEIVER
MIDI in
9 ©Velleman nv