Operation
This appliance is intended for residential use only.
POTENTIAL HAZARD
Debris can be thrown by unit in operator's
or bystander's direction.
WHAT CAN HAPPEN
Flying debris can cause serious personal
injury to operator or bystanders.
HOW TO AVOID THE HAZARD
Never blow hard objects such as nails, bolts
and rocks.
Always wear safety goggles or other
suitable eye protection, long pants and
shoes while operating unit.
Never operate unit near bystanders or pets.
Use extra care when cleaning debris from
stairs.
Starting/Stopping (Fig. 7)
1.
To turn unit on, move switch to the '|' position.
2.
To turn unit off, move switch to the 'O' position.
An arrow and the word "OFF" on the top of the
switch indicate which direction to move the
switch.
Troubleshooting
PROBLEM
Unit won't run or stops running
EN–5
All manuals and user guides at all-guidesbox.com
Maintenance
Servicing Double-insulated
Appliance
In a double-insulated appliance, two systems of
insulation are provided instead of grounding. No
grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added
to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of the
system, and should be done only by qualified service
personnel. Replacement parts for a double-insulated
appliance must be identical to the parts they replace.
A double-insulated appliance is marked with the
words "DOUBLE INSULATION" or "DOUBLE
INSULATED." The symbol (square within a square)
may also be marked on the appliance.
Toro Service
Support
If your unit requires service or maintenance, your
nearest TORO Master Service Dealer is the best
dealer to assist you. Refer to the "Yellow Pages" of
your local telephone directory in the section titled
"Lawn Mowers." TORO Master Service Dealers are
listed under the TORO trademark. If you need help
locating a TORO Master Service Dealer near you, call
1-800-421-9684 for assistance.
POSSIBLE CAUSE
1.
Unit not plugged in
2.
On/off switch in "off" position
3.
Blown fuse or tripped circuit breaker
4.
Faulty extension cord
CORRECTIVE ACTION
1.
Plug in unit
2.
Turn to "on"
3.
Replace fuse or reset
breaker
4.
Replace cord