Publicité
Les langues disponibles
Les langues disponibles
• Before you start using the cooker it should be leveled, which is particularly important for fat distribution in a frying pan. To
this purpose, the adjustable feet are accessible after removal of the drawer. The adjustment range is � 5 mm.
GAS CONNECTION
Caution!
The cooker should be connected to a gas supply of the particular type of gas that the appliance is manufactured
to function with. Information about the type of gas that the cooker has been adapted to by the factory is shown
on the rating label. The cooker should be connected exclusively by an appropriately authorised fitter and only
that person has the right to adapt the cooker to a different type of gas. .
Fitting guidelines
A fitter should:
• have a gas fitter's authorisation;
• be acquainted with the information included on the rating label of the cooker about the type of gas to which the cooker is
adapted; the information should be compared with the gas supply conditions at the place of installation;
• check:
- airing efficiency, that is effeciency of air exchange in the rooms;
- tightness of gas fitting connections;
- effectiveness of alle functional elements of the cooker;
- if the electricity supply is adapted to function with a safety ground lead (zero).
• check the settings of the control knobs for the burnersde to ensure good functioning of the ingition and the
thermocouple.
Caution!
The cooker may only be connected to a liquid gas cylinder of the existing gas supply by an authorised fitter, observing all
safety rules.
Connection with a flexible steel hose
If the cooker is connected according to the class 2 specifications, sub-class I, only flexible metal hose can be used which
meet the valid national regulations. Gas feeding connector must be G ½" threaded coupling. Use only pipes and fittings that
meet the requirements of the valid standards. Maximum admissible length of the flexible hose is 2000 mm. Make sure the
connection is not touching any mobile elements which could damage the hose.
28
•
English
MOUNTING THE OVERTURNING PREVENTION BRACKET
The bracket is mounted to prevent overturning of the cooker. When the
overturning prevention bracket is installed, a child who climbs on the oven
door will not overturn the appliance.
B
A
Cooker, height 850 mm
A = 60 mm
B = 103 mm
Cooker, height 900 mm
A = 104 mm
B = 147 mm
Publicité
