Télécharger Imprimer la page

Inventum VFG5020GRVS Mode D'emploi page 24

Cuisinière gaz-électrique

Publicité

Les langues disponibles

Les langues disponibles

wall to discolour and/or deform.
• Always use the pan supports and suitable cookware.
• Always place the pan on the pan support. Placing the pan directly
on the burner cap can result in dangerous situations.
• Aluminium trays or foil are not suitable as cooking utensils. They
can burn into the burner caps and pan supports.
• The cooker can only function effectively if the burner
components have been assembled using the guide ridges.
Ensure that the pan supports lie properly against each other and
flat on the drip tray. Only then the pans can be positioned stably.
• Keep oven gloves or oven cloths away from the flame.
• Always raise the glass cover when using the stove.
The glass cover can break through heating. Ensure that all
burners are switched off and have cooled down before
closing the cover.
• If there is water on the cover, dry it before opening. If you fail to
do so, moisture may enter the cooker.
• Do not use the decorative cover as a cooking surface.
• The appliance should only be connected by a registered installer.
• Faulty parts may only be replaced by original parts. The
manufacturer can only guarantee that original parts meet safety
requirements.
• If the connecting cable is damaged, it may only be replaced
by the manufacturer, the manufacturer's service organisation
or equivalently qualified persons, in order to avoid dangerous
situations.
• The appliance should not be connected to the network via
a multi-plug socket or extension lead, as the safe use of the
appliance can then not be guaranteed.
• The appliance must always be earthed.
• The walls and the worktop surrounding the appliance must be
heat resistant up to at least 85°C. Even though the appliance
itself does not get hot, the heat of a hot pan could discolour or
deform the wall.
• Failure to maintain the cooker clean could lead to deterioration
of the surface that could adversely affect the life of the
appliance and possible result in a hazardous situation.
• The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
• Before plugging into a socket, check that the voltage in your
home corresponds with the voltage printed on the appliance.
24
English

Publicité

loading